Le Dell lattitude XT2 quasiment officiel …

| 0 Commentaires

Initialement prévu courant 2008, puis fin 2008, c’est désormais une fuite chez Dell qui a mis en ligne le manuel de service du dell Lattitude XT2, laissant présager une prochaine commercialisation du nouveau modèle de leur Tablet PC.

Conservant l’intégralité du package et du carénage initial, cette nouvelle version ne se distingue finalement que par les améliorations internes consenties par Dell à savoir:

  • Utilisation de la DDR3,
  • Port eSATA,
  • Migration complète vers une solution Intel avec la carte graphique GMA X4500 graphics en lieu et place de la précédente Carte ATI
  • 5Go de RAm maximum au lieu de 3 (1 Go soudé apparement) 
  • Disque dur 1.8” SATA
  • 34mm Express Card en lieu et place de l’express card 54
  • Un port USB assurant la charge d’un produit externe meme lorsque al tablette est éteinte (comme pour le Toshiba M700)
  • CPU Intel ULV Core 2 Duo ( 9400)
  • Poids de 1.7 kg
  • Il semblerait toujours être Multitouch via une solution NTrig

Enfin a noter que l’écran est toujours le meme 12 pouces en WXGA affichant 262 K Couleurs, qu’il peut être équipé d’une batterie 4 cellules ou 6 cellules ou 8 cellules.

A voir si le prix, lui enfin, sera revu un peu à la baisse …

Processor
Processor type Intel® Core™ 2 Duo ULV
L2 cache 3 MB
External bus frequency 800 MHz
System Information
System chipset Intel SFF Chipset
Data bus width 64 bits
DRAM bus width Dual-channel (2) 64-bit buses
Processor address bus width 36 bits
Flash EPROM 4 MB
PCI bus 32 bits
ExpressCard™
  NOTE: The ExpressCard slot is designed only for ExpressCards. It does NOT support PC cards.
ExpressCard connector ExpressCard slot (supports both USB- and PCIe-based interfaces)
Cards supported 34 mm ExpressCards
External bus frequency 800 MHz
Secure Digital (SD) Memory Card Reader
Cards supported SD, SDIO, SD HC, Mini SD (w/adapter) MMC, MMC+, Mini MMC (w/adapter))
Memory
Memory module connector one user-accessible SODIMM socket
Memory module capacities 1 GB, 2 GB, 4 GB
Memory type DDR3 SODIMM
Minimum memory 1 GB (onboard memory)
Maximum memory 5 GB capable (requires 64-bit Windows Vista® operating system)
Smart Card
Read/write capabilities Reads and writes to all ISO 7816 1/2/3/4 microprocessor cards (T=0, T=1)
Cards supported 3 V and 5 V
Program technology supported Java cards
Interface speed 9600–115,200 bps
EMV level Level 1 certified
WHQL certification PC/SC
Compatibility Compatible within a PKI environment
Insert/eject cycles Certified for up to 100,000 cycles
Ports and Connectors
Audio microphone connector, stereo headphone/speakers connector
IEEE 1394 4-pin serial connector
E-dock Standard E-Dock connector for devices such as E-Dock advanced port replicators and expansion stations
The optional media base can be connected to the E-Dock connector.
Mini-card One dedicated half-mini-card slot for WLAN
One dedicated full-mini-card slot for WWAN / GPS (mobile broadband)
Network adapter RJ-45 port
USB two 4-pin USB 2.0-compliant connectors
Powered USB 5-pin power supply and 4-pin USB
2.0-compliant connector
USB Two 4-pin USB 2.0-compliant connectors
One USB connector can be used as an eSATA connector. The other USB connector with PowerShare can be used to charge a USB device when the computer is turned on or off.
Video 15-hole connector
Communications
Network adapter 10 / 100 / 1000 Ethernet LAN on system board
Wireless internal WLAN, WWAN, and Bluetooth® wireless support (if optional cards are purchased)
Video
Video type integrated
Video controller Mobile Intel® GMA X4500 Graphics Controller
Data bus integrated
Video memory up to 256 MB shared memory
Audio
Audio type two-channel high definition audio codec
Audio controller IDT 92HD71B
Stereo conversion 24-bit (analog-to-digital and digital-to-analog)
Interfaces:  
Internal high definition audio
External microphone-in connector, stereo headphones/speakers mini-connector
Speaker one 4-ohm speaker
Internal speaker amplifier 2-Watt channel into 4 ohms
Volume controls Volume control buttons and program menus
Display
Type (active-matrix TFT)  
Active X / Y 12.1 inches WXGA
Dimensions
Height 261.12 mm (10.28 inches)
Width 163.2 mm (6.43 inches)
Diagonal 307.34 mm (12.1 inches)
Maximum Resolutions 1280 x 800 at 262 K colors
Operating angle 0° (closed) to 160°
Refresh rate 60 Hz (40 Hz in All Day Battery Life (ADBL) mode)
Viewing angles
Horizontal 40/40°
Vertical 15/30°
Pixel pitch 0.204
Power consumption (panel with backlight, typical) 3.0 W (max)
Keyboard
Number of keys 87 (U.S. and Canada); 88 (Europe); 91 (Japan)
Layout QWERTY/AZERTY/Kanji
Touch Pad
X/Y position resolution
(graphics table mode)
240 CPI
Size
Width 73.0-mm (2.9-inch) sensor-active area
Height 42.9-mm (1.7-inch) rectangle
Battery
Type 4-cell: 28 Whr/14.8V
6-cell: 58 Whr/11.1V
Slice 48: Whr/11.1V
Dimensions:
Depth
4-cell lithium-ion battery 210 mm (8.27 inches)
6-cell lithium-ion battery 210 mm (8.27 inches)
Slice 9.5 mm (0.38 inch)
Height
4-cell lithium-ion battery 18 mm (0.71 inch)
6-cell lithium-ion battery 23.2 mm (0.91 inch)
Slice 186 mm (7.32 inches)
Width
4-cell lithium-ion battery 46.5 mm (1.83 inch)
6-cell lithium-ion battery 68.5 mm (2.7 inches)
Slice 279 mm (10.98 inches)
Weight
4-cell lithium-ion battery 0.2 kg (0.44 lb)
6-cell lithium-ion battery 0.37–0.38 kg (0.82–0.84 lb)
Slice 0.59–0.61 kg (1.3–1.34 lb)
Voltage 11.1 VDC (6-cell, Slice)
14.8 VDC (4-cell)
Charge time (approximate)
Computer off approximately 1 hour to 80% capacity (4-cell battery)
Approximately 2 hours to 100% capacity (4 cell battery)
Life span (approximate) 300 charge/discharge cycles
Temperature range
Operating 0° to 35°C (32° to 95°F)
Storage -10° to 60°C (14° to 140°F)
Coin-cell battery CR-2032
AC Adapter
Input voltage 90–264 VAC
Input current (maximum) 1.1 A
Input frequency 47–63 Hz
Output current 3.3 A (maximum at 10ms pulse)
2.3 A (continuous)
Output power 45 W or higher
Rated output voltage 19.5 ±1.0 VDC
Dimensions:
Height 16 mm (0.63 inch)
Width 63 mm (2.48 inches)
Depth 88 mm (3.46 inches)
Temperature range:
Operating 0° to 40°C (32° to 104°F)
Storage –10° to 70°C (–50° to 158°F)
Fingerprint Reader (optional)
Type UPEK TCS3 TouchStrip™ strip sensor with CMOS active capacitive pixel-sensing technology
Array size 248 x 2 pixels
Physical
Height 19.95–26.82 mm (0.79–1.06 inch)
Width 290.6 mm–296.6 mm (11.44–11.68 inches)
Depth 204 mm–226 mm (8.03–8.9 inches)
Weight 1 kg (2.2 lb)

Laisser un commentaire

Champs Requis *.


Social Media Auto Publish Powered By : XYZScripts.com